Products
Products
- View as
Brass Stamping Parts
Nuote Metals from China is a qualified supplier of brass stamping parts for connector, switch, and electronics customers. We stamp terminals, contacts, and shielding springs from C26000, C26800, and C22000 brass – with stress-relief annealing to prevent relaxation and cracking. Plating: tin, nickel, silver. PPAP documentation available.
View DetailsSend Inquiry
Deep Drawn Brass Stampings
Deep drawn brass stampings from Nuote Metals are produced at our China facility on multi-stage transfer presses, with in-line annealing between draw stages. We form C26000, C26800, and C22000 brass into cups, shells, connector housings, and RF shields – controlling wall thickness, draw depth, and flange flatness. Thickness from 0.1mm to 1.5mm, draw depth up to 50mm. PPAP documentation available.
View DetailsSend Inquiry
Copper Stamping Parts
Nuote Metals is a China-based supplier of copper stamping parts for electrical, electronics, and EV customers. We stamp busbars, contacts, and terminals from C11000 and C10200 copper – with burr control, chip evacuation, and oxide management to preserve conductivity. Tin and silver plating available. PPAP documentation on request.
View DetailsSend Inquiry
Custom Precision Metal Stamping
Here in Nuote Metals in Dongguan. We do custom precision metal stamping here in our workshop. When you need parts made exactly to your drawings, that's what we do. Custom precision metal stamping means we follow every measurement closely. send us your design, we will make the tools and stamp the parts. We work with different metals, such as stainless steel, aluminum, copper, and more. Every custom precision metal stamping job gets checked carefully. Our workers use tools to measure each piece. They make sure all the holes and edges are right. Customers come to us when they need parts made just so. We can make samples first for you to test.
View DetailsSend Inquiry
Aluminum Stamping Parts
We are Nuote Metals in Dongguan. Our factory makes many kinds of aluminum stamping parts. These parts are made by pressing aluminum sheets into shapes.Our aluminum stamping parts are light and strong. They do not rust like some other metals. We make them in different sizes and designs. Some are small and simple. Some are larger and more complex. Every aluminum stamping part is checked by our workers. They look for clean edges and the right shape.Many customers order our aluminum stamping parts regularly. They like the good quality and light weight. We can make samples fast when needed.
View DetailsSend Inquiry
Aluminum Sheet Metal Stamping
This is Nuote Metals from Dongguan. We run a workshop that makes things from aluminum sheets. Our job is aluminum sheet metal stamping. We take flat aluminum sheets and press them into useful shapes. Every day, we do aluminum sheet metal stamping for different customers. We can make many parts this way. Some parts are simple. Some parts have more detail. We check all parts after aluminum sheet metal stamping. Our workers look at each piece. They make sure it is the right shape and size. People come to us for aluminum sheet metal stamping because we do good work. We also make samples first if needed.
View DetailsSend Inquiry
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy